Product successfully added to your shopping cart
Best Seller
Inspection Tools
Bullet Points:
1.Easy Carrying: Made of durable ABS material, this Tire Depth Measuring Tool is designed to be pocket-sized, and easy to carry around without taking up space.
2.Tire Wear Measurement: Making your driving safer, Tire Tread Depth Gauge is suitable for measuring tire tread wear, allowing you to regularly monitor your car's tire tread levels.
3.Simple Operation: Allowing you to quickly check the tire tread depth, Tire Depth Gauge Tool is featuring a slider design for easy operation, convenient for measuring tire depth.
4.Measuring Range: Featuring a 0-20mm measuring range, Tire Depth Ruler is clear and easy to read measurement data, designed with a probe head for easy measurement.
5.Widely Applicable: Compatible with most types of vehicle tires, Truck Tire Depth Gauge is widely used in cars, motorcycles, trucks, etc, making sure you drive safely.
Description:
Quickly and accurately check tire tread depth.
Slider design for easy operation.
Probe head for easy measurement.
Specification:
Name: Tire Tread Depth Gauge Caliper
Material: ABS
Measuring range: 0.20mm
Package List:
Tire Tread Depth Gauge *1
Notes:
Due to the lighting effects and camera angles, the color of the item and that shown in the picture might have a nuance.
Due to manual measurement, there might be a tolerance in the product size.
0-25mm Car Wheel Tyre Measuring Ruler Universal Automotive Trucks Van Digital Monitoring Tool Tire Tread Pattern Depth Thickness Detection Gauge Meter
Feature:
1. The reading is clear, the warning value is particularly clear, and it protects your safety.
2. Cylindrical measuring rod, the test is more accurate.
Specification:
Product name: tire tread depth gauge 0-25mm
Product Model: PC-3624 Dual Color/0-32NDS 0-25mm
Product size: about 9X2.5cm
Product material: stainless steel, ABS
Product weight: about 10g
Depth range: 0-25mm
Applicable models: Universal
Notice:
Red zone: tires need to be replaced; yellow zone: warning about to be replaced; green zone: normal use
Red area: 0-3mm&0-3/32
Yellow area: 3-5mm&4-32"-5/32"
Green area: 5-25mm&6/32"-1"
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1*Tire depth gauge
[Applicable] The tester is designed for brake pads (IV,V) with a base plate thickness of 6 mm / 0.2 inches. Suitable for internal and external brake pads with 1.5mm markings and calibration check. Black handle with white scale for easy reading of data.
【Time Saving Brake Pad Thickness Gauge】Quickly measure your vehicle's exterior and interior brake pads without removing the wheel. Clever time-saving tool to help determine if your vehicle has adequate brake pad lining.
【Easy-to-use design】The slim design allows the tool to position the back of the pad so the probe can measure the distance between the bottom of the pad and the brake disc, align the brake pads and press to measurement.
【High Quality Stainless Steel Material】The metal part of the brake pad thickness gauge is made of stainless steel, and the ergonomic pressure handle is made of ABS material, which is sturdy and durable and not easy to snap.
Specification:Material:ABSColor:BlackQuantity:2/4/8/10Pcs
Specifications:
1. Product Material: Copper+Stainless Steel
2. Size: Product size: 1.1 * 1.1 * 2.4cm Packaging size: 1.1 * 1.1 * 2.4cm
3. Scope of application: sedans, motorcycles, bicycles
4. Product features: Ensure normal tire pressure, reduce tire wear, and extend tire life
5. Explanation: Red represents low tire pressure, yellow represents low tire pressure, and green represents normal tire pressure
6. Package includes: 1/4/8 * tire pressure warning caps
Detection light prompt:
Danger: Red light - less than or equal to 1.9 bar
Warning: Yellow light -2.0-2.3 bar
Safety: Green light -2.3-2.5bar
Features:
Paint Thickness Gauge: The thickness gauge is used to measure the thickness of metal coating and coating, such as paint/enamel/chromium on steel, paint and anodic oxidation coating on aluminum/copper. Automatically detect the properties of the substrate.
Easy to Read: HD display, paint thickness displayed on large screen, Unit switching (um micron, mm mm, Mill mils), accurate and fast testing.
Anti-slip Design: The design of Paint Thickness Gauge is ergonomic, anti-slip groove make it easy to test during use. Palm size, easy to handle.
For Car Buyer: When buying a second-hand car, the store may not be able to tell us that the car had a serious collision. When purchasing a used car, check the car paint to ensure that the paint thickness on each panel is approximately the same.
Widely Used: This instrument is used for nondestructive measurement of coating and paint thickness. It is a necessary equipment for material surface treatment, widely used in manufacturing, metal processing, chemical industry, commodity inspection and other fields, and can also work stably in laboratories, workshops and outdoor.
Specifications:
Item: Paint Thickness Gauge
Color: Red
Material: ABS
Battery: 2*AAA Battery(not Included)
Measuring Range: 0-2000UM
Measurement Accuracy: ± (3%+1um)
Resolution: 0um~99.9um(0.1um) 100um~999um(1um) >1000um(0.01mm)
Minimum Convex Radian: 5mm
Minimum Concave Radian: 25mm
Minimum Measured Area: Diameter 20mm
Minimum Substrate Thickness: 0.2mm, 0.05mm
Maximum Measuring Speed: 2 Readings Per Second
Operating Temperature: - 10 ℃~50 ℃
Size: 9.5*4*2.2cm
Packing Size: 11.8*5.8*3cm
Packing Weight: 90g
Package List:
1* Paint Thickness Gauge
1* Some Calibration Piece
1* User Manual
Many Questions about Dropshipping Services Are As Follows:
1.How many orders can you handle per day?
we are a large company in Shenzhen,China,with a large warehouse that can handle large orders everyday.We send out countless parcels everyday.We can guarantee the order you request.
2.How fast can you process orders?
We will arrange shipment as soon as possible after you pay the order.Priority delivery for dropshipping order
3.Could you ship order without any receipts,invoices and promotional offer inside the package?
Absolutely!No invoices,receipts,promotional offer if you leave notes on the order(if you want,we can provide.)
4.If you need other products?
We can provide most products you need as much as possible1
If you have any other questions,please feel free to contact us.
We are very grateful to cooperate with you.
5.We can support CSV/Excel File Dropshipping.
6.There is no limited stock to fulfill the orders on a daily basis
FUNCTION:
* Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery, etc
* Easy to use: simply connect the transmitter in series with the circuit or wire under test, (i.e.: in place of a blown fuse,across a connector, in series with an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the tracers flexible probe to find the trouble spot
* 42 V Ready: for use in the new generation of vehicles with mixed or single 42 Volt systems
* Operates on DC voltages from 6 to 42 volts
* Internally protected against power surges and overloads
* 7" flexible probe allows reaching wires in congested places
* Transmitter and Receiver LEDs show open or short circuit conditions
* Adjustable sensitivity for all tracing situations
* No wire piercing required, non-contact technology!
HOW TO USE THE PROBE?
The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas. Depending on the circuit characteristic and sensitivity settings,
the probe will pick up the signal from the wire in a range of positions. However, for the best possible range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o)
to the wire being traced and either above or below it.
Description: Airbag diagnostic, resistor insideThis is useful tool on diagnostic Airbag SRS SyetemIt suitable for most Airbag SRS SystemUniversal for Auto Car SUV Off-Road Pickup TruckColor:BlacKSize:5x2x1cmFeature: They will make the airbag computer think that the airbag or seat belt pretensioner is connected and, if no other problems exist, should make the airbag light go off.This is very useful for making repairs to the airbag system if you do not have a good airbag yet. Or for making sure that everything is functioning properly before you connect the new airbag.Please note that most vehicles require the airbag computer to be reset or replaced in order for the airbag light to stay off.Installation: They are very easy to use and simply connect into the two connectors that normally connect to the drivers airbag.Attention: Most front driver (steering wheel) and front passenger (dashboard) airbags have two inflators per airbag, so to simulate those airbags you will need two simulators.These Simulator can be used to simulate:Driver AirbagPassenger AirbagSide AirbagCurtain AirbagKnee AirbagSeat Belt PretensionersBelt Buckle PretensionersAny component of the SRS system with an inflatorPackage included: 5,10,20,30,50,100Pcs*Airbag Emulator Simulator
Autel PowerScan PS100 Electrical Automotive Circuit Tester Tool 12V/24V AVOmeter Diagnostic Tool
Autel PowerScan PS100 is the best electrical tester for reducing diagnostic time in all 12- to 24-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can: Test Voltage & Polarity/ Continuity/Signal CircuitActivate Components in Your Hand & in the Vehicle & w/GroundTest Trailer Lights and ConnectionsFind Bad GroundFind Short CircuitsRed/Green Polarity LED.
■ Bullet Points
4 Advanced Working Modes
4 advanced modes can be accessed by depressing the Mode Button and cycling through each one:DC voltage: read the DC voltage with a resolution of 0.1 volts.AC voltage: read the Max. voltage, the Min. voltage, frequency, and duty cycle.Resistance: read the resistance between the tip and auxiliary ground lead.Tone On/Off: technicians use the tone in a dark environment to distinguish the test results and turn it off when unnecessary.
Compnent Activation Function
Autel PS100 Power circuit tester tool will test the positive, negative, and open circuit easliy, also testing for continuity, diagnosing circuit failures, checking good and bad grounds, easy to read AC/DC current activating components on and off the vehicle, sensing MIN /MAX voltage, etc.By generating activation signals for the components, you can judge whether the components are in good condition, such as lights, motors, wipers, radiator fans, relays, etc.
Quickly Identify Polarity & Highly Sensitive Probe
Autel PS100 instantly checks component continuity and identifies positive, negative and open circuits. When the positive terminal is connected, the red LED light is on, accompanied by a beep. When the negative terminal is connected, the green LED is on, along with low pitched tone. If it is an open circuit, the LED light will not light. Besides, sharp stainless steel probe for piercing wires effortlessly, also for hard to reach tight areas.
20FT Cable + 20FT Extension Cable
Unlike the power probe, Autel PS100 power circuit probe kit comes with 20ft extension, the cable long enough for working on longer vehicles and trailers.
Dual Head Lights & Intuitive LCD Backlit Digital Screen
To be a proper solution for nighttime testing jobs, the electric test pen comes with a lighting function to support your testing needs in a low-light environment. What's more, this PS100 circuit light tester with highly clear LCD digital backlit display screen, a resolution of 0.1V, clear&visible digital readouts for day and night. Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip.
Overload Protection & Quick Self Test
10 Amp Circuit Breaker built-in to protect the tool from overload. The circuit breaker will trip if it becomes overloaded to protect the battery and give a buzzer warning. When the circuit breaker is tripped, the tool will NOT be able to conduct battery current to the tip even when the power switch is pressed. Besides, PS100 circuit tester has quick self test function, which can ensure the tester is in good condition before use.
Bullet Points:1.Enhance Road Safety: With our Tire Tread Depth Gauge, you can monitor wear of your car tires, ensuring they are in top shape before hitting the road. It keeps you safe while driving. 2.Accurate Measurable Depth: Ensuring safety, this gauge provides a measurable range up to 20 mm, progressively delivering clear data with its user-friendly probe design. 3.Portable Convenience: Our tire tread depth gauge, made of ABS material, ensures long-lasting service without sacrificing portability. Its conveniently pocket-sized design makes it a must-have companion for all drivers. 4.Widely Applicable: Avoid accidents caused by worn tires. Our tire tread depth gauge accurately measures tread depth, widely applicable to cars, motorcycles, trucks, and more. Keep your journeys secure. 5.Easy to Operate: By adopting the slider design, our Tire Tread Depth Gauge makes it effortless to measure tire depth. With quick and easy checks, you can ensure safe travels for you and your passengers. Check your tire's tread easily and quickly with our tire measuring tool. It has a measurable range of 0-25 mm and is pocket-sized for easy portability. Designed for wide application, it's easy to use and a tool for any driver concerned about safety on the road.Specification:Material: ABSPacking List:Tire Tread Depth Gauge*1pcs(New and old styles are random)Note:Due to different lighting and screen settings, the item color may be slightly different from the picture.Due to different manual measurements, please allow a 1-2cm difference in size.
Portable Brake Fluid Diagnostic Pen Automatic Shutdown Auto Brake Diagnostic Testing Tool Brake Fluid Test Pen for Motor Vehicle
Feature:
1. Accurate Measurement: The Brake Oil Detection Pen has powerful functions, simple operation, accurate measurement, and safe use.
2. Automatic Shutdown Function: The Auto Brake Diagnostic Testing Tool can detect all brake oil and has an automatic shutdown function.
3. Can Test DOT3/4/5 Brake Fluids: The Brake Fluid Tester has five LED indicators to display more accurate test results, and can test DOT3, DOT4, and DOT5 brake fluids.
4. LED Display: The Brake Fluid Inspection Pen determines the moisture change of the brake fluid based on the change in electrical conductivity. It clearly shows the level of moisture contained in the LED, and high moisture content can lead to a lower boiling point and affect braking performance. Red indicates that the brake fluid needs to be replaced immediately, green indicates that it is in good condition, and yellow indicates that it is acceptable, but will be replaced soon.
5. Suitable Battery: The Auto Brake Diagnostic Testing Tool requires a No. 7 AAA battery, and the battery cover is opened in the direction indicated by the arrow on the test pen. (Shipped without battery)
Specification:
Origin: Mainland China
Product size: 150mm/5.9in
Note:
If the green LED does not light up after pressing the power button for a long time, it is necessary to replace the battery.
Please clean the test probe with clean water after using the test pen every time.
Please do not expose the brake fluid to the air for a long time, as the brake fluid has strong water absorption.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x Car Brake Fluid Tester Pen